Board-to-Board Header, 1.27 mm
YT-B2B-127-S1.27 mm pitch, LCP housing, 2×5 to 2×50.
- Pitch is 1.27 mm.
- Made from 2×5 to 2×50 positions, dual row.
- Mounting type: Straight.
- Rated 1 A per pin at.
- Housing is LCP, UL94V-0.
- Minimum order 1,000 pcs; samples ship in 7 to 10 days.
- Samples 7–10 days
- Custom position counts
- RoHS per shipment
- Tube, tray or tape
YT-B2B-127-S
| Model | Pitch | Rows | Positions | Mounting | Contact | Insulator | MOQ |
|---|---|---|---|---|---|---|---|
| YT-B2B-127-S | 1.27 mm | Dual | 2×5 to 2×50 | Straight | Brass, gold plated | LCP, UL94V-0 | 1,000 pcs |
Specification updated 19 November 2026. Dimensions in mm, ratings at 25 °C.
LCP rather than PA6T, because the walls between pins are thin and LCP fills them better on a fine pitch mold.
When this part is not the right choice
Most quotation problems come from a part that fits the drawing but not the process. These are the cases where we would steer you elsewhere.
- Boards that only see reflow. Through-hole parts add a selective solder or hand-solder step after the oven. If the assembly has no wave solder stage, an SMT version of the same footprint removes that step.
- Prototype boards built by hand. At 1.27 mm the pads are small enough that hand soldering produces more rework than the parts are worth.
- Anything above the rated current. Ratings are per pin at 25 °C ambient. Bundle several loaded pins in a sealed enclosure and the derating is yours to calculate, not ours to guess.
On the assembly line
Parts pack in tubes, standing on the housing rather than on the pins, so the tails do not take the load in transit. Trays are available for short runs and odd position counts. Solder tails are sized for a 1.6 mm board by default. Tell us the board thickness at quotation and we form the tail to match; it comes off the same die.
Packing, MOQ and lead time
Minimum order is 1,000 pcs. Samples are free of charge and leave in 7 to 10 days. Production runs about 15 days after sample approval, which covers molding, plating and the inspection record that ships in the box. Position counts from 2×5 to 2×50 are standard. Outside that range we cut a new mold, about 15 days. Every shipment includes a RoHS declaration and the lot inspection record.
Questions buyers ask
Does the YT-B2B-127-S support reflow soldering?
YT-B2B-127-S uses a LCP housing, which takes reflow at 260 °C for 10 seconds. It can go through a lead-free oven with the rest of the board.
What is the minimum order quantity for the YT-B2B-127-S?
Minimum order is 1,000 pcs. Samples are free of charge and ship in 7 to 10 days; production runs about 15 days after sample approval.
Can the position count of the YT-B2B-127-S be changed?
Yes. Standard tooling covers 2×5 to 2×50. A count outside that range needs a new mold, about 15 days, and there is no tooling charge for counts we already run.
Board-to-Board models
| Model | Pitch | Rows | Positions | Mounting | Contact | Insulator | MOQ |
|---|---|---|---|---|---|---|---|
| YT-B2B-200-D | 2.00 mm | Dual | 2×5 to 2×30 | Straight | Brass, gold flash | PA6T, UL94V-0 | 1,000 pcs |
| YT-B2B-254-R | 2.54 mm | Dual | 2×5 to 2×40 | Right angle | Brass, gold plated | PA6T, UL94V-0 | 1,000 pcs |
| YT-B2B-254-S | 2.54 mm | Dual | 2×5 to 2×40 | Stacking | Brass, gold plated | PA6T, UL94V-0 | 1,000 pcs |