Board-to-Board
Right-angle and stacking parts. Housing height made to order.
- Pitch2.00 mm
- RowsDual
- MountStraight
Non-standard requests are welcome. Our own mold shop reworks tooling for special specifications.
Free samples · RoHS declaration with every shipment
Pick by family, then by pitch and mounting type. Non-standard counts are quoted from drawing, usually same day.
Right-angle and stacking parts. Housing height made to order.
DC2 and DC3 box headers with ejector latches, plus IDC ribbon sockets.
Stamped contacts, 5.0 to 8.5 mm body. SMT and DIP tails.
Single and dual row, 1.0 to 3.96 mm pitch. Breakable strip or molded to count.
Filter by pitch or mounting type. Position count, plating and packing are confirmed at quotation.
| Model | Pitch | Rows | Positions | Mounting | Contact | Insulator | MOQ |
|---|---|---|---|---|---|---|---|
| YT-B2B-127-S | 1.27 mm | Dual | 2×5 to 2×50 | Straight | Brass, gold plated | LCP, UL94V-0 | 1,000 pcs |
| YT-B2B-200-D | 2.00 mm | Dual | 2×5 to 2×30 | Straight | Brass, gold flash | PA6T, UL94V-0 | 1,000 pcs |
| YT-B2B-254-R | 2.54 mm | Dual | 2×5 to 2×40 | Right angle | Brass, gold plated | PA6T, UL94V-0 | 1,000 pcs |
| YT-B2B-254-S | 2.54 mm | Dual | 2×5 to 2×40 | Stacking | Brass, gold plated | PA6T, UL94V-0 | 1,000 pcs |
| YT-BH254-2R | 2.54 mm | Dual | 2×5 to 2×40 | Right angle | Brass, gold plated | PA6T, UL94V-0 | 2,000 pcs |
| YT-BH254-2S | 2.54 mm | Dual | 2×4 to 2×40 | Straight | Brass, gold plated | PA6T, UL94V-0 | 2,000 pcs |
| YT-FH254-2x10 | 2.54 mm | Dual | 2×10 (20 pin) | Straight DIP | Phosphor bronze, gold flash | PBT, UL94V-0 | 1,000 pcs |
| YT-FH254-2 | 2.54 mm | Dual | 2×2 to 2×40 | Straight DIP | Phosphor bronze, gold plated | PA6T, UL94V-0 | 1,000 pcs |
| YT-FH254-SMT | 2.54 mm | Dual | 2×2 to 2×40 | SMT | Phosphor bronze, gold plated | PA6T, UL94V-0 | 1,000 pcs |
| YT-FH254-LP | 2.54 mm | Dual | 2×2 to 2×40 | Straight DIP | Phosphor bronze, gold plated | PA6T, UL94V-0 | 1,000 pcs |
| YT-FH254-1 | 2.54 mm | Single | 1×2 to 1×40 | Straight DIP | Phosphor bronze, gold plated | PA6T, UL94V-0 | 1,000 pcs |
| YT-DC2-254 | 2.54 mm | Dual | 6 to 64 | Straight | Brass, gold flash | PBT, UL94V-0 | 2,000 pcs |
| YT-DC3-127 | 1.27 mm | Dual | 6 to 68 | Straight | Brass, gold flash | PA6T, UL94V-0 | 1,000 pcs |
| YT-DC2R-254 | 2.54 mm | Dual | 6 to 50 | Right angle | Brass, gold plated | PBT, UL94V-0 | 2,000 pcs |
Right angle and SMT versions use the same housing with different pin forming.
| A · Pitch | 2.54 mm ±0.05 |
|---|---|
| B · Body length | N × 2.54 mm |
| C · Overall height | 11.5 mm standard |
| D · Pin above housing | 8.5 mm standard |
| E · Tail length | 3.0 mm standard |
| Pin position tolerance | ±0.02 mm |
| Housing tolerance | ±0.05 mm |
| Insulator | PA6T, UL94V-0 |
| Contact | Brass / phosphor bronze |
| Rated current | 3 A per pin |
| Rated voltage | 500 VAC |
| Operating temperature | −40 °C to +105 °C |
Standard families running on our own tooling. Pick a model to see pitch, positions, plating and MOQ.
Board thickness, mating cycles and the soldering process decide the part, not the category name.
Stacking and programming headers. Through-hole if the board goes through wave solder, SMT if it goes through reflow. Body height sets the gap between boards.
I/O boards and relay modules. Where the connector gets unplugged during service we plate 10 to 30 µin gold. Permanent joints get tin, which is cheaper and solders better.
Appliance control boards. PBT housing with gold flash, 1.27 or 2.0 mm pitch. Packed in tube or tape for the placement machine.
Samples are free of charge, including for non-standard position counts. Parts we have to tool take 7 to 10 days after the drawing is signed off.
A pin header is a bare male connector with 0.64 mm square posts on a 2.54 mm or 1.27 mm pitch. A box header adds a shrouded plastic housing and accepts an IDC cable socket. Choose a pin header for board-to-board or fly-lead wiring; choose a box header when a ribbon cable must key and latch.
Gold flash (about 3 microinches) suits a few mating cycles in dry indoor equipment. Specify 10-30 microinches for 50-100 mating cycles or humid environments. Above 30 microinches the cost rises sharply with little reliability gain.
SMT headers suit high-volume reflow lines and keep the back of the board clear. Through-hole headers withstand repeated mating and manual rework. Match the choice to your soldering process, not the datasheet.
PA6T handles lead-free reflow temperatures up to 260 C and keeps dimensional stability on fine-pitch parts. PBT is cheaper and fine for wave solder or through-hole. Both are available in UL94V-0.
Stacking height equals the male post height plus the female socket engagement depth, minus the insertion depth. For a 2.54 mm stacking header, confirm both the board standoff and the housing height before fixing the gap.
UL94V-0 is a flame-retardant rating: a vertical sample self-extinguishes within 10 seconds after flame removal and does not drip burning particles. Yuantu housings are PA6T, LCP or PBT rated UL94V-0.
A tin plating is typically rated around 20 mating cycles; 3-10 microinches of gold reaches about 50 cycles; 30 microinches is specified for 100 cycles or more. Actual life depends on contamination and insertion force.
Coplanarity is the maximum vertical deviation of all solder tails from a common plane. On SMT headers it is usually specified at 0.10 mm or less; excessive coplanarity causes open joints after reflow.
WhatsApp is the fastest route. We answer during Beijing working hours (UTC+8), usually within a couple of hours. If you only have a sample, put a ruler next to it and take a photo.