Female Header, Dual Row, SMT

YT-FH254-SMT

2.54 mm, surface mount tails with pick-and-place cap.

  • Pitch is 2.54 mm.
  • Made from 2×2 to 2×40 positions, dual row.
  • Mounting type: SMT.
  • Housing is PA6T, UL94V-0.
  • Minimum order 1,000 pcs; samples ship in 7 to 10 days.
  • Samples 7–10 days
  • Custom position counts
  • RoHS per shipment
  • Tube, tray or tape
Specification

YT-FH254-SMT

ModelPitchRowsPositionsMountingContactInsulatorMOQ
YT-FH254-SMT2.54 mmDual2×2 to 2×40SMTPhosphor bronze, gold platedPA6T, UL94V-01,000 pcs

Specification updated 19 November 2026. Dimensions in mm, ratings at 25 °C.

PackagingTape and reel
Body height8.5 mm

Cap on top so the nozzle seals. The cap comes off after reflow, sometimes with a bit of flash left on the body.

For reflow we use high temperature nylon, same as the through-hole part.

When this part is not the right choice

Most quotation problems come from a part that fits the drawing but not the process. These are the cases where we would steer you elsewhere.

  • Hand assembly. Fine pitch surface mount parts need a stencil and a placement machine. Soldering these by hand gives bridges at a rate that is not worth the saved tooling.
  • Cost-first wave-solder boards. PA6T costs more than PBT and the temperature margin buys nothing if the part never enters an oven above 200 °C.
  • Long mating pins. A standard socket grips the first 6 mm of the pin. With longer pins, ask for the deeper body rather than forcing the pin in further.
  • Anything above the rated current. Ratings are per pin at 25 °C ambient. Bundle several loaded pins in a sealed enclosure and the derating is yours to calculate, not ours to guess.

On the assembly line

Coplanarity is checked before packing, because a lifted corner is enough to cause a solder bridge at this pitch. Parts ship on tape and reel with a pick-and-place cap where the design needs one. Solder tails are sized for a 1.6 mm board by default. Tell us the board thickness at quotation and we form the tail to match; it comes off the same die.

Packing, MOQ and lead time

Minimum order is 1,000 pcs. Samples are free of charge and leave in 7 to 10 days. Production runs about 15 days after sample approval, which covers molding, plating and the inspection record that ships in the box. Position counts from 2×2 to 2×40 are standard. Outside that range we cut a new mold, about 15 days. Every shipment includes a RoHS declaration and the lot inspection record.

Questions buyers ask

Does the YT-FH254-SMT support reflow soldering?

YT-FH254-SMT uses a PA6T housing, which takes reflow at 260 °C for 10 seconds. It can go through a lead-free oven with the rest of the board.

What is the minimum order quantity for the YT-FH254-SMT?

Minimum order is 1,000 pcs. Samples are free of charge and ship in 7 to 10 days; production runs about 15 days after sample approval.

Can the position count of the YT-FH254-SMT be changed?

Yes. Standard tooling covers 2×2 to 2×40. A count outside that range needs a new mold, about 15 days, and there is no tooling charge for counts we already run.

Same family

Female Headers models

Category page
ModelPitchRowsPositionsMountingContactInsulatorMOQ
YT-FH254-2x10 2.54 mm Dual 2×10 (20 pin) Straight DIP Phosphor bronze, gold flash PBT, UL94V-0 1,000 pcs
YT-FH254-2 2.54 mm Dual 2×2 to 2×40 Straight DIP Phosphor bronze, gold plated PA6T, UL94V-0 1,000 pcs
YT-FH254-LP 2.54 mm Dual 2×2 to 2×40 Straight DIP Phosphor bronze, gold plated PA6T, UL94V-0 1,000 pcs
YT-FH254-1 2.54 mm Single 1×2 to 1×40 Straight DIP Phosphor bronze, gold plated PA6T, UL94V-0 1,000 pcs
Quotation

Send a drawing or a photo of the part.

WhatsApp is the fastest route. We answer during Beijing working hours (UTC+8), usually within a couple of hours. If you only have a sample, put a ruler next to it and take a photo.