Female Header 2×10, Straight

YT-FH254-2x10

2.54 mm, 20 positions, for ribbon and programmer links.

  • Pitch is 2.54 mm.
  • Made from 2×10 (20 pin) positions, dual row.
  • Mounting type: Straight DIP.
  • Rated 3 A per pin at.
  • Housing is PBT, UL94V-0.
  • Minimum order 1,000 pcs; samples ship in 7 to 10 days.
  • Samples 7–10 days
  • Custom position counts
  • RoHS per shipment
  • Tube, tray or tape
Specification

YT-FH254-2x10

ModelPitchRowsPositionsMountingContactInsulatorMOQ
YT-FH254-2x102.54 mmDual2×10 (20 pin)Straight DIPPhosphor bronze, gold flashPBT, UL94V-01,000 pcs

Specification updated 19 November 2026. Dimensions in mm, ratings at 25 °C.

Rated current3 A per pin
PackagingTube
Body height8.5 mm

2×10 is the default for JTAG, ISP and ribbon-to-board links. It pairs with our 2×10 box header on the other board.

When this part is not the right choice

Most quotation problems come from a part that fits the drawing but not the process. These are the cases where we would steer you elsewhere.

  • Boards that only see reflow. Through-hole parts add a selective solder or hand-solder step after the oven. If the assembly has no wave solder stage, an SMT version of the same footprint removes that step.
  • Reflow ovens. PBT softens near 200 °C. Boards that go through lead-free reflow need the PA6T version of the same footprint, which we also mold.
  • Long mating pins. A standard socket grips the first 6 mm of the pin. With longer pins, ask for the deeper body rather than forcing the pin in further.
  • Anything above the rated current. Ratings are per pin at 25 °C ambient. Bundle several loaded pins in a sealed enclosure and the derating is yours to calculate, not ours to guess.

On the assembly line

Parts pack in tubes, standing on the housing rather than on the pins, so the tails do not take the load in transit. Trays are available for short runs and odd position counts. Solder tails are sized for a 1.6 mm board by default. Tell us the board thickness at quotation and we form the tail to match; it comes off the same die.

Packing, MOQ and lead time

Minimum order is 1,000 pcs. Samples are free of charge and leave in 7 to 10 days. Production runs about 15 days after sample approval, which covers molding, plating and the inspection record that ships in the box. Position counts from 2×10 (20 pin) are standard. Outside that range we cut a new mold, about 15 days. Every shipment includes a RoHS declaration and the lot inspection record.

Questions buyers ask

Does the YT-FH254-2x10 support reflow soldering?

YT-FH254-2x10 is molded in PBT, which is a wave-solder part. PBT softens near 200 °C, so do not run it through a reflow oven. If the board is reflow-only, ask us for the same footprint in PA6T.

What is the minimum order quantity for the YT-FH254-2x10?

Minimum order is 1,000 pcs. Samples are free of charge and ship in 7 to 10 days; production runs about 15 days after sample approval.

Can the position count of the YT-FH254-2x10 be changed?

Yes. Standard tooling covers 2×10 (20 pin). A count outside that range needs a new mold, about 15 days, and there is no tooling charge for counts we already run.

Same family

Female Headers models

Category page
ModelPitchRowsPositionsMountingContactInsulatorMOQ
YT-FH254-2 2.54 mm Dual 2×2 to 2×40 Straight DIP Phosphor bronze, gold plated PA6T, UL94V-0 1,000 pcs
YT-FH254-SMT 2.54 mm Dual 2×2 to 2×40 SMT Phosphor bronze, gold plated PA6T, UL94V-0 1,000 pcs
YT-FH254-LP 2.54 mm Dual 2×2 to 2×40 Straight DIP Phosphor bronze, gold plated PA6T, UL94V-0 1,000 pcs
YT-FH254-1 2.54 mm Single 1×2 to 1×40 Straight DIP Phosphor bronze, gold plated PA6T, UL94V-0 1,000 pcs
Quotation

Send a drawing or a photo of the part.

WhatsApp is the fastest route. We answer during Beijing working hours (UTC+8), usually within a couple of hours. If you only have a sample, put a ruler next to it and take a photo.