Connectors for vehicle electronics: where standard headers stop being enough
A standard header can survive inside a cabin module. It cannot survive the engine bay, and the difference…
A standard header can survive inside a cabin module. It cannot survive the engine bay, and the difference…
The gap is a mechanical requirement, and there are three ways to meet it. Only one of them…
The shroud prevents one specific failure: the connector going on one pin off, or backwards. If that failure…
Halving the pitch halves the connector footprint and roughly halves the current per pin. If you need density…
The choice is made by your soldering line and by what pulls on the connector in the field.…
If the connector is soldered once and never touched, an open pin header is fine. If a cable…
WhatsApp is the fastest route. We answer during Beijing working hours (UTC+8), usually within a couple of hours. If you only have a sample, put a ruler next to it and take a photo.