Female Header, Dual Row, SMT
YT-FH254-SMT2.54 mm, surface mount tails with pick-and-place cap.
- Pitch is 2.54 mm.
- Made from 2×2 to 2×40 positions, dual row.
- Mounting type: SMT.
- Housing is PA6T, UL94V-0.
- Minimum order 1,000 pcs; samples ship in 7 to 10 days.
- Samples 7–10 days
- Custom position counts
- RoHS per shipment
- Tube, tray or tape
YT-FH254-SMT
| Model | Pitch | Rows | Positions | Mounting | Contact | Insulator | MOQ |
|---|---|---|---|---|---|---|---|
| YT-FH254-SMT | 2.54 mm | Dual | 2×2 to 2×40 | SMT | Phosphor bronze, gold plated | PA6T, UL94V-0 | 1,000 pcs |
Specification updated 19 November 2026. Dimensions in mm, ratings at 25 °C.
Cap on top so the nozzle seals. The cap comes off after reflow, sometimes with a bit of flash left on the body.
For reflow we use high temperature nylon, same as the through-hole part.
When this part is not the right choice
Most quotation problems come from a part that fits the drawing but not the process. These are the cases where we would steer you elsewhere.
- Hand assembly. Fine pitch surface mount parts need a stencil and a placement machine. Soldering these by hand gives bridges at a rate that is not worth the saved tooling.
- Cost-first wave-solder boards. PA6T costs more than PBT and the temperature margin buys nothing if the part never enters an oven above 200 °C.
- Long mating pins. A standard socket grips the first 6 mm of the pin. With longer pins, ask for the deeper body rather than forcing the pin in further.
- Anything above the rated current. Ratings are per pin at 25 °C ambient. Bundle several loaded pins in a sealed enclosure and the derating is yours to calculate, not ours to guess.
On the assembly line
Coplanarity is checked before packing, because a lifted corner is enough to cause a solder bridge at this pitch. Parts ship on tape and reel with a pick-and-place cap where the design needs one. Solder tails are sized for a 1.6 mm board by default. Tell us the board thickness at quotation and we form the tail to match; it comes off the same die.
Packing, MOQ and lead time
Minimum order is 1,000 pcs. Samples are free of charge and leave in 7 to 10 days. Production runs about 15 days after sample approval, which covers molding, plating and the inspection record that ships in the box. Position counts from 2×2 to 2×40 are standard. Outside that range we cut a new mold, about 15 days. Every shipment includes a RoHS declaration and the lot inspection record.
Questions buyers ask
Does the YT-FH254-SMT support reflow soldering?
YT-FH254-SMT uses a PA6T housing, which takes reflow at 260 °C for 10 seconds. It can go through a lead-free oven with the rest of the board.
What is the minimum order quantity for the YT-FH254-SMT?
Minimum order is 1,000 pcs. Samples are free of charge and ship in 7 to 10 days; production runs about 15 days after sample approval.
Can the position count of the YT-FH254-SMT be changed?
Yes. Standard tooling covers 2×2 to 2×40. A count outside that range needs a new mold, about 15 days, and there is no tooling charge for counts we already run.
Female Headers models
| Model | Pitch | Rows | Positions | Mounting | Contact | Insulator | MOQ |
|---|---|---|---|---|---|---|---|
| YT-FH254-2x10 | 2.54 mm | Dual | 2×10 (20 pin) | Straight DIP | Phosphor bronze, gold flash | PBT, UL94V-0 | 1,000 pcs |
| YT-FH254-2 | 2.54 mm | Dual | 2×2 to 2×40 | Straight DIP | Phosphor bronze, gold plated | PA6T, UL94V-0 | 1,000 pcs |
| YT-FH254-LP | 2.54 mm | Dual | 2×2 to 2×40 | Straight DIP | Phosphor bronze, gold plated | PA6T, UL94V-0 | 1,000 pcs |
| YT-FH254-1 | 2.54 mm | Single | 1×2 to 1×40 | Straight DIP | Phosphor bronze, gold plated | PA6T, UL94V-0 | 1,000 pcs |