What 3 A per pin really means on a 2.54 mm header
Three amps is one pin, on its own, at a stated temperature rise. Put eight of them side by side in a sealed box and the…
Pitch and position choices, plating thickness, soldering process, tooling lead times. Written by the people who quote and build the parts.
Three amps is one pin, on its own, at a stated temperature rise. Put eight of them side by side in a sealed box and the…
They are two halves of one connection, not two alternatives. Confusing them on a BOM is how a project ends up with headers and no way…
Body height sets the gap between two boards. Pick it after you know the gap you need, not before, or the enclosure becomes the thing that…
The choice is made by your soldering line and by what pulls on the connector in the field. Electrical performance is almost never the deciding factor.
Flash is enough for a connector soldered once. Above 50 mating cycles the number stops being cosmetic and starts deciding your field failure rate.
If the connector is soldered once and never touched, an open pin header is fine. If a cable gets plugged in during assembly or in the…
WhatsApp is the fastest route. We answer during Beijing working hours (UTC+8), usually within a couple of hours. If you only have a sample, put a ruler next to it and take a photo.